Windows 7 cd rom not working 無料ダウンロード.How to Solve the issue of CD-ROM, DVD, Disc Drive not working in Windows 
Part 1: Yellow Exclamation Mark when CD-Drive not Working:.Windows7でISOディスクイメージを無料でダウンロードする方法！ | アプリやWebの疑問に答えるメディア
DVD drive not detected Windows 7 tutorial will address the following concerns:cd dvd drive not detected Windows 7 free fixa cd dvd device driver is Windows7のISOディスクイメージはMicrosoft公式サイトから 無料でダウンロードが可能です 。. 以下のMicrosoft公式サイトURLにWindows7のISOディスクイメージがあり、ダウンロードの方法と手順が記載されています。. Microsoft公式サイトのソフトウェア無料ダウンロード. Windows 7 のインストールまたは再インストールが必要な場合は、このページからディスク イメージ Feb 22, · MKD6B-HV23H-TMHWXG3P-TRVJM seemed to work for meEDIT: Never mind. The above code DOESN’T work. I didn’t realize that Windows 7 lets the install keep going after entering several wrong product keys
Windows 7 cd rom not working 無料ダウンロード.富士通Q&A – [Windows 7] CD/DVDドライブのドライバーを再インストールする方法を教えてください。 – FMVサポート : 富士通パソコン
Jun 30, · Try testing the CD-ROM in Safe Mode. If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. After deleting the CD-ROM, reboot the computer. Windows should then detect the CD-ROM and reinstall it DVD drive not detected Windows 7 tutorial will address the following concerns:cd dvd drive not detected Windows 7 free fixa cd dvd device driver is Nov 04, · The next solution to help us encounter the problem of CD-Drive not working is to use the CD/DVD ‘Fix it’ Troubleshooter. To enable the troubleshooter, all one has to do is click ‘Run Now’ and follow the onscreen instructions that appear. This is more or less a conclusive step to eliminating the problem of CD-Drive not working
See your browser’s documentation for specific instructions. HP Customer Support – Knowledge Base. HP Customer Support. Select your model. Let HP find my products Identify now HP can identify most HP products and recommend possible solutions. How does HP install software and gather data? Learn how to upgrade to Windows 11 Windows 11 Upgrade Guide. This document applies to HP computers with Windows 7. Use these steps to troubleshoot this condition. note: If you have upgraded your computer to Windows 7 and the drive was working before but is no longer working correctly in Windows 7, you can save time by starting at Step 5 to remove the upper and lower control filters from the registry.
Step 1: See if the drive appears in Windows 7 BIOS The BIOS in your computer manages all communication between the hardware components and the operating system. To check the BIOS, use one of the following sets of steps, depending on the type of computer and the version of BIOS you are using:. If you are using a notebook computer running Windows 7 Turn off the computer and wait five seconds. Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears.
If BIOS does not open using F10 , repeat the process using the F1 key instead. Use the arrow keys to navigate to the System Configuration screen. Select Boot Options and then press Enter. On the Boot Options sub-screen, select Boot Order and then press Enter. Press Esc and then press Enter to Exit BIOS. If you are using a desktop computer with BIOS version 6 or less running Windows 7 Turn off the computer and wait five seconds.
If you are using a desktop computer with BIOS version 7 or greater running Windows 7 Turn off the computer and wait five seconds. Use the arrow keys to select Device Configuration , and then press Enter. Press the Esc key again, press Enter , and then press Enter again to Ignore Changes and Exit BIOS. If you are using a desktop computer, continue to Step 4. If you are using a notebook computer, contact HP Customer Support for further assistance.
Continue to the next step. Step 2: Checking the drive name in Device Manager in Windows 7 Use the following steps to reinstall the drive in Device Manager and to find if Windows is able to recognize the drive.
Click Start , and enter Device Manager into the Search field. Click Device Manager. Figure : Opening Device Manager. Figure : Scan for hardware changes. Scan for hardware changes again to attempt to detect the drive. If the drive is still not detected, close Device Manager and skip to Step 3 to reset power and reseat the drive cables if necessary. If a drive name is shown with an alert icon the drive icon is marked with an alert symbol, , double-click the drive name to find more information.
Do the following depending on what is shown in the Device Status section:. If error code 10 , 19 , 31 , 32 , 39 or 41 is shown in Device Status, a problem exists with the integration of previous CD burning software. Use Step 5 to remove associated control filters from the registry. If a drive name is shown with a disabled icon the drive icon is marked with an arrow pointing down, , the drive has been disabled.
Right-click the drive name and select Enable. You might have to restart the computer. The drive should work correctly once it has been enabled. note: If the drive cannot be enabled, a required software service or driver is disabled or not functioning properly. Resetting the BIOS might also resolve this problem: To reset the BIOS on a notebook computer , restart the computer, press F1 or F10 depending on computer model repeatedly at startup to open the BIOS Setup Utility, press F9 to Setup Defaults, press Enter , and then press F1 or F10 again to Save and Exit.
To reset the BIOS on a desktop computer with BIOS version 6 or less , restart the computer, press F1 or F10 depending on computer model repeatedly at startup to open the BIOS Setup Utility, press F5 , press Enter , and then press F1 or F10 again to Save and Exit. To reset the BIOS on a desktop computer with BIOS version 7 or greater , restart the computer, press F1 or F10 depending on computer model repeatedly at startup to open the BIOS Setup Utility, use the arrow keys to navigate to the File tab, select Apply Defaults and Exit , and then press Enter.
Use the steps in Software for burning discs does not recognize the drive to make the disc burning software detect the drive. Step 3: Resetting the power on computers running Windows 7 Under certain conditions the drive might lose communication with Windows, even after restarting Windows.
To reset the drive, do the following steps:. Select Start and then Shut down from the power menu. Wait until the computer fully shuts down and then disconnect the power cord from the computer. If you have a notebook computer, remove all batteries from their compartments, wait 10 seconds, and then reinsert the battery or batteries. If your notebook computer has a battery that is sealed within the computer’s case, a battery that cannot be removed easily, skip this step. Turn on the computer and wait for Windows to start.
If you are using a notebook computer, skip to Step 5. warning: The edges of metal panels can cut skin. Be careful not to slide skin along any interior metal edge of the computer.
caution: This product contains components that can be damaged by electrostatic discharge ESD. To reduce the chance of ESD damage, work over a non-carpeted floor, use a static dissipative work surface such as a conductive foam pad , and wear an ESD wrist strap connected to a grounded surface.
Turn off the computer, unplug all cords from the computer, and then press the Power button on the front of the computer for five seconds. Figure : Power cable and data cable. Reinsert the power and data cables into the back of the drive making sure the cables fit snugly into their connectors and making sure there are no bent pins. Be careful not to dislodge other cables.
Figure : Replacing the side panel. Check if the drive name appears in BIOS using one of the following sets of steps, depending on your computer’s version of BIOS. If your computer features BIOS version 6 or less , use the following steps to check if the drive name appears in BIOS:. If BIOS does not open using F10 , restart the computer and press the F1 key instead. Press F5 , and then press the Enter key to reset the BIOS to the defaults.
Setup Defaults can also be found on the EXIT screen of the BIOS Setup Utility. Press F10 or F1 and then press Enter to Save and Exit. If your computer features BIOS version 7 or greater , use the following steps to check if the drive name appears in BIOS:. Press the Esc key again, press Enter , and then press Enter again to Ignore Changes and Exit.
If the drive name appears , the drive is recognized by the BIOS and should also be recognized by Windows. If Windows recognizes the drive, you are finished. If Windows does not recognize the drive, repeat Step 2 to see if the drive name appears in Device Manager and troubleshoot disc burning software if needed. If the drive name still does not appear , replace the cable, the drive, or have the computer serviced.
note: If you suspect that the drive might be bad after using these steps, test the drive to see if the hardware has failed. Step 5: Clearing the upper and lower registry filters on computers running Windows 7 Clear the registry filters for Device Manager error codes 10 , 19 , 31 , 32 , 39 or 41 using the following steps:.
If you cannot use the Microsoft Fix it Solution, continue using these steps to clear the upper and lower registry filters manually. Unplug all non-essential external plug and play devices, especially cameras. Then complete the following steps. Click Start , and then enter regedit into the Search field. Click regedit. Figure : Search for regedit. If you are prompted for an Administrator password or confirmation, type the password or provide confirmation. Figure : Registry Editor.
Click File , click Export , type a filename that is easy for you to remember, and then click Save. A copy of the registry has been saved for back-up purposes to the Documents folder. If problems occur after using these steps, browse to the file and double-click it to restore the registry. Select 4D36EECE-BFCBE Make sure you have selected this exact key name.
If a LowerFilters value is listed on the right side of the registry editor window, select the LowerFilters value and press the Delete key. Confirm the deletion by clicking Yes. Figure : Registry Editor: LowerFilters key.